Hardware Preparation - Renesas CK-RX65N Getting Started Manual

CK-RX65N
SIM activation, Creating the trial account and using Dashboard with RYZ014A or Ethernet
Next step please see from 4.3 Hardware Preparation section

4.3 Hardware Preparation

✓
Connect micro-USB cables to debug port (J14 on the CK-RX65N board)
✓
Connect micro-USB cables to serial port (J20 on the CK-RX65N board)
✓
Connect the RYZ014A Cellular PMOD module to the PMOD1
✓ Set the Jupmer of J16 "Debug"
✓
Connect RYZ014A Cellular PMOD module and insert sim card
R01QS0064EJ0130 Rev.1.30
June.02.23
Figure 45 Dashboard for this application
Figure 46 Connecting the USB and RYZ014A Pmod
Application for AWS - Getting Started Guide
Page 32 of 56