Renesas CK-RX65N Getting Started Manual page 37

CK-RX65N
SIM activation, Creating the trial account and using Dashboard with RYZ014A or Ethernet
Application for AWS - Getting Started Guide
Figure 55. Storing the Thing Name into the Data Flash
8. Press option 'f' and 'g' to read and validate the stored information in the data flash.
Note: Validation of the stored data is very limited and validates minimum set of data points. Users are
required to input the valid data to the flash obtained from the Dashboard for the proper working of the
Application.
4.4.1.1 Starting the Application
After activating the SIM card, registering to the Dashboard and configuring the required Cloud credentials via
the CLI, the application is ready to run. Press the option '6' to Start the Application. The Application prints
Welcome screen along with the status of validating the Cloud credentials data present in the data flash as
shown below.
When the connection is success, the data is showed.
R01QS0064EJ0130 Rev.1.30 Page 37 of 56
June.02.23