Renesas CK-RX65N Getting Started Manual page 12

CK-RX65N
SIM activation, Creating the trial account and using Dashboard with RYZ014A or Ethernet
Application for AWS - Getting Started Guide
8. Apply Patch files
This project must be patched after code generation. When running code generation, the source code will be
overwritten by code generator. For this reason, please apply the patch each time after running code
generation.
Refer to "[Project Root folder]\readme-path-memo.txt" for how to apply the patch.
The patch sources are located in "[Project Root folder]\sorce_patch" folder.
Figure 13 readme-path-memo.txt and sorce_patch folder
9. Select Project → Build All and confirm that 0 errors are reported.
Note: Make sure to clean the project before building it for the first time. If a demo build error occurs after the
initial build, clean the project again and then build it.
R01QS0064EJ0130 Rev.1.30 Page 12 of 56
June.02.23