Running The Application & Activation Of Sim Card Contain With Ck-Rx65N; Activating A Sim Card On Truphone - Renesas CK-RX65N Getting Started Manual

CK-RX65N
SIM activation, Creating the trial account and using Dashboard with RYZ014A or Ethernet
6. In the CLI shown in the above snapshots, choose the number to select the commands. For E.g. When
you press '1' Firmware Version of the application is displayed as shown below. To return to the main
menu press "space bar" key.
4.1.4 Running the application & activation of SIM card contain with CK-RX65N
This section explains how to activate SIM card that is contained in CK-RX65N.If you use ether, you can skip
this step.
Press '4' to display CAT-M Information (IMEI &ICCID). This menu will communicate with the CAT-
1.
M module to obtain the IMEI and ICCID values needed for activating the SIM card. Upon success, the IMEI
and ICCID values will be displayed on the terminal screen. The program will continue to attempt to
communicate with the CAT-M module until it has successfully connected or timed out. The IMEI and ICCID
values are used to activate the SIM card.
4.1.5 Activating SIM card
One of two SIM cards is included in this kit that is Truphone or MicroAI Launchpad.
Please activate the SIM card as following steps depending on the included SIM card.
4.1.5.1 Activate on Truphone
To activate the included Truphone SIM card, please visit the Truphone SIM Activation platform at
truphone.com/connectit
1. On the Business page, click Start activation button under IoT SIM Activation.
R01QS0064EJ0130 Rev.1.30
June.02.23
Figure 23. Get Version Information
Figure 24. CAT-M Information
and use the following steps:
Application for AWS - Getting Started Guide
Page 19 of 56