Running The Application Project - Renesas CK-RX65N Getting Started Manual
Hide thumbs
Also See for CK-RX65N:
- User manual (34 pages) ,
- Quick start manual (30 pages) ,
- Getting started manual (55 pages)
Table of Contents
Advertisement
CK-RX65N
SIM activation, Creating the trial account and using Dashboard with RYZ014A or Ethernet
4.1.3 Running the Application Project
To run the Application project, use the following instructions to setup the board.
4.1.3.1 Connecting the Board to the Serial port Console of the PC
1. On the host PC, open Windows Device Manager. Expand Ports (COM & LPT), locate USB Serial
Device (COMxx) and note down the COM port number for reference in the next step.
Note: USB Serial Device drivers are required to communicate between the CK-RX65N board and the
2. Open Tera Term select New connection and select Serial and COMxx: USB Serial Device (COMxx)
and click OK.
R01QS0064EJ0130 Rev.1.30
June.02.23
Figure 18. USB Serial Device in Windows Device Manager
Figure 19. Selecting the Serial Port on Tera Term
Application for AWS - Getting Started Guide
Page 16 of 56
Advertisement
Table of Contents
