Star (*) Key Function; System Stay On Line After Touch Tone; Automatic Hang-Up - DKS 1802-EPD Owner's Manual

Telephone entry systems
Table of Contents

Advertisement

3.1.10

Star (*) Key Function

This programming sequence sets the function of the * key on the keypad during conversation. This
key can be set to hang-up the entry system when pressed during conversation, or it can be
programmed to touch-tone out during conversation.
Factory setting = 0 (hang-up).
1.
Press *27 and enter the four-digit MASTER CODE _ _ _ _ (beep).
2.
Press 0* (beep) for hang-up, or press 1* (beep) for touch-tone.
3.
Press 0# TOGETHER to end this programming step (beeeeeep).
3.1.11 System to Stay On-Line or Hang Up after Touch Tone
This programming sequence provides a method for the telephone entry system to remain on line after
a resident has pressed the touch tone number to open the door or gate. Each relay can be set
independently to either remain on line or hang up.
Factory setting = 1 (hang up after touch tone) for both relays.
1.
Press *28 and enter the four-digit MASTER CODE _ _ _ _ (beep).
2.
Press 1* for relay 1 (beep), or press 2* for relay 2 (beep).
3.
Press 0* (beep) to keep the system on line, or press 1* (beep) to make it hang up.
4.
Repeat steps 2 and 3 to program the other relay.
5.
Press 0# TOGETHER to end this programming step (beeeeeep).
3.1.12
Automatic Hang-up Function
This programming sequence determines when the phone system will automatically hang itself up
after a predetermined time of inactivity. You can program the system to not hang-up (0), to hang-up
after 5 sec of dial-tone (1), to hang-up after 15 sec of silence (2) or to hang-up after either 5 sec of
dial-tone or 15 sec of silence (3). NOTE: This programming function is available on REV G
boards or higher only.
Factory setting = 1 (hang-up after 5 sec of dial-tone).
1.
Press *40 and enter the four-digit MASTER CODE _ _ _ _ (beep).
2.
Enter the hang-up code desired _ then press * (beep).
3.
Press 0# TOGETHER to end this programming step (beeeeeep).
Code
0
No hang-up.
1
Hang-up after 5 sec. of dial-tone (Factory setting).
2
Hang-up after 15 sec. of silence.
3
Hang-up after 5 sec. of dial-tone OR 15 sec. of silence.
Function
1802-065-A-8-06
Page 27

Advertisement

Table of Contents
loading

This manual is also suitable for:

1802

Table of Contents