Expanded Adjustment Function For "Mixer" Window Width (Nuage Fader) - Yamaha NUAGE FADER Ncs500-FD Operation Manual

Operation (Nuage Master)
Numbers in the illustration below correspond to the instruction
steps.
1.
Press [CHANNEL] in the MULTI FUNCTION
DISPLAY section.
2.
In the [Multi function display], touch the
"Channel information," then select the
channel for you want to change the "Quick
Control" parameters.
3.
In the [Multi function display], touch the
"QUICK CONTROL" tab.
4.
In the [Multi function display], touch the
parameter of the [Quick control] to be
changed.
The pop-up window is displayed.
5.
Touch the parameter to be assigned.
Expanded Adjustment
Function for "Mixer" Window
Width (Nuage Fader)
In addition to the conventional items, you can now also
adjust the "Mixer" bottom positions.
Operation
Numbers in the illustration below correspond to the instruction
steps.
1.
While pressing the [SHIFT], [CTRL], and [ALT]
keys in the MODIFIER section at the same
time, operate a [Multi function knob] (lower).
Depending on the [Multi function knob] you operate,
you can adjust the positions of the left edge, right
edge, bottom edge, or the meter length for the "Mixer."
Refer to the label area on the "Mixer" for which [Multi
function knob] corresponds to which adjusted item.
NOTE
While pressing the [SHIFT], [CTRL], and [ALT] keys in the
MODIFIER section at the same time, press an item from [Sub
parameter 1] in the SECTION CONTROL section to [Sub
parameter 4] to switch the display showing the "Mixer."
Added functions in NUAGE V1.7 50