Changed Display On The Marker Jump Pop-Up Window Into The List Display (Nuage Master); Added A Function For Project Cursor Positioning (Nuage Master) - Yamaha NUAGE FADER Ncs500-FD Operation Manual

Changed Display on the
Marker Jump Pop-Up Window
into the List Display
(Nuage Master)
The pop-up display for the Marker Jump function and
Cycle Marker jump function has been changed to a list
display. Nearby markers are displayed in relation to the
entered "Marker ID."
Operation
1. Press [MARKER] in the NUMERIC PAD section.
2. Press one of the following keys: [0] through [9],
[BACK SPACE], [CLEAR], [PREV
[CYCLE .], or [ENTER].
The following pop-up is displayed in the [Multi function
display].
Marker Pop-Up
Cycle Marker Pop-Up
NOTE
• You can use at the bottom of the window to scroll
through the window.
• Since Cubase does not have an ADR function, Marker ID/Take
Number are not displayed in the window.
Added a Function for Project
Cursor Positioning
(Nuage Master)
You can now enter values in units of hours, minutes, and
seconds to position the "Project Cursor" on the
TRANSPORT page.
Settings
Switch the input method in "Numeric Pad Input" on SETUP
Page – PAGE 3.
SETUP Page – PAGE 3
-
], [NEXT +],
Left
Right
NOTE
If you change this setting, the input method in the Locate function
is also changed.
Operation
1. Press [Display access] in the TRANSPORT section.
2. Press [PARAM] in the NUMERIC PAD section.
3. Touch "Time Display" on the screen.
4. Use the keys in the NUMERIC PAD section to enter
TRANSPORT – MAIN Page
Enter values in units of hours, minutes, and seconds.
Conventional method (text input)
the position of the Project cursor.
Added functions in NUAGE V1.6 68