Setting Automation Mode For Each Track (Nuage Master); Insert Operation For Control Room Channels (Nuage Master) - Yamaha NUAGE FADER Ncs500-FD Operation Manual

Setting Automation Mode for
Each Track (Nuage Master)
You can now use the [Multi function display] to set the
automation mode for each track.
Operation
Numbers in the illustration below correspond to the instruction
steps.
1.
Press [SEL] in the SECTION CONTROL
section to select the desired track for setting
the automation mode.
2.
Press [CHANNEL] in the MULTI FUNCTION
DISPLAY section.
3.
Touch the area enclosed in the red square in
the window image below.
4.
Touch the automation mode to be set to the
track.
Insert Operation for Control
Room Channels (Nuage
Master)
You can now use the [Multi function display] to operate
the "Insert" to each channel in the Control Room.
Operation
Numbers in the illustration below correspond to the instruction
steps.
1.
Press the [Display access] button in the
CONTROL ROOM section.
2.
In the [Multi function display], touch the
"INSERT" tab.
3.
Configure the "Insert" settings. Refer to the
window description below for details.
Added functions in NUAGE V1.7 53