Added The Display In The [Channel Name Display] (Nuage Fader); Added Display Channels On The Lcd (Nuage Fader) - Yamaha NUAGE FADER Ncs500-FD Operation Manual

Control surface
Hide thumbs Also See for NUAGE FADER Ncs500-FD:
Table of Contents

Advertisement

Added the display in the
[Channel name display]
(Nuage Fader)
The whole name of the channel strip can be scrolled and
displayed, and the display format can be changed.
When there is a long undisplayed portion of a channel
strip name, the whole name of the selected channel strip
can be scrolled and displayed only once if the channel
strip is selected or the channel is scrolled using the
[Touch slider bar].
NUAGE FADER Setup
To open this window, click the Nuendo menu "Devices" 
"NUAGE FADER Setup."
Disp Mode
1
Selects the display format of a [Channel name display].
"Disp Mode" can also be set up in the "SETUP page" of
Nuage Master
(page
88).
Added display channels on
the LCD (Nuage Fader)
The previous view can be called up after using the Agent
function ([SEL CH], etc.), and you can scroll through and
display the selected channels when the desired channel
is not shown on the exterior of LCD. Also, you can select
whether to display a channel from the left of the end of the
console(s), or to display from the right of the end of the
console(s).
CHANNEL VIEW CONTROL
Section
1
2
[EVENT ON TR] / [EVENT CYCLE] /
1
[PLAYING CH] / [SEL CH] / [EXPAND] /
[ALL CH]
If the same button is pressed once again while displaying
the channel corresponding to each button, the display will
return to the previous view.
However, while the Project Cursor is moving, even if you
press [EVENT CYCLE] or [PLAYING CH], the display does
not return, but an agent function is performed again
instead.
If you press one of these buttons to return while holding
down [ALT], the leftmost channel is displayed there even
after returning. This function is convenient when you are
looking for a specific channel using an agent function.
2
[SEL CH]
If you press [SEL CH] while holding down [ALT], the
selected channel is displayed when the channel is not
displayed on the exterior of LCD.
1
3
Added functions in NUAGE V1.1
85

Advertisement

Table of Contents
loading

Table of Contents