Added Collective Bypass Function For Inserts (Nuage Fader); Added Collective Bypass Function For Dynamics (Nuage Master); Added Support For Switching Between Multiple Avid Pro Tools (Nuage Workgroup Manager) - Yamaha NUAGE FADER Ncs500-FD Operation Manual

Added Collective Bypass
Function for Inserts
(Nuage Fader)
You can now turn bypass on/off for "Inserts" on the
selected channels.
Operation
1. Press [INSERT] in the SECTION CONTROL section.
"INSERTS" is displayed in the label area.
2. Press [Multi function button A] corresponding to
the window to switch bypass on/off for "Inserts."
Channel Strip
Channel Setting Mode
NOTE
If you press [Sub parameter 1] through [Sub parameter 8] in
Channel Setting mode, the window for the "Inserts" assigned to
the relevant slot is displayed. Press the same button once again
to close the window.
This function is disabled if two channels are displayed in Channel
Setting mode.
Added Collective Bypass
Function for Dynamics
(Nuage Master)
You can now turn bypass on/off for "Dynamics" on the
selected channels.
Operation
1. Select the track for turning dynamics on/off.
2. Press [DYNAMICS] in the MULTI FUNCTION
DISPLAY section.
The CHANNEL CONTROL – DYN page is displayed in the
[Multi function display].
3. Touch "BYP" on the screen to turn bypass on/off
for "Dynamics."
CHANNEL CONTROL – DYN Page
Added Support for Switching
between Multiple Avid Pro
Tools (NUAGE Workgroup
Manager)
You can now register two Avid Pro Tools in a Workgroup.
(Previously, it was possible to register only one.)
NOTE
For more information about Avid Pro Tools settings, refer to the
operation manual for Nuage Master or Nuage Fader.
Added functions in NUAGE V1.6 66