Field Operation - H&S 2958 Operator's & Parts Manual

4.8 FIELD OPERATION

Operating Safety
1. Read and understand the Operator's Manual and all safety signs before
using.
2. Place all controls in neutral, stop the engine, set park brake, remove ignition
key and wait for all moving parts to stop before servicing, adjusting, repairing or
unplugging.
3. Do not adjust discharge deflector unless rotor has stopped turning. Keep others
out.
4. Do not operate when any guards are damaged or removed. Install and secure
guards before starting.
5. Do not operate with side access door open. Install and secure side access door
before starting.
6. Keep hands, feet, clothing and hair away from all moving and/or rotating parts.
7. Do not allow riders on the Bale Processor or tractor during operation or transporting.
8. Clear the area of all bystanders, especially small children, before starting.
9. Attach securely to the tractor using a retainer on the drawbar pin and a safety
chain.
10. Do not point discharge opening towards people, animals or buildings when
operating.
11. Stay away from discharge path. Keep others away.
12. Stay away from bale tines when raising or lowering lift frame. Keep others away.
13. Clean reflectors, SMV signs and lights before transporting.
14. Use hazard flashers on tractor when transporting.
15. Install lift frame lock pin before transporting.
16. Before applying pressure to the hydraulic system, make sure all components are
tight and that steel lines, hoses and couplings are in good condition.
Follow this procedure when using the Bale Processor:
1. Attach Bale Processor to the Tractor (see Section 4.7)
2. Review and follow the Pre-Operation checklist (see Section 4.4)
3. Review the location and function of all controls (see Section 4.6)
4. Transport the machine to the bale storage area (see Section
4.10)
- 4.9 -
L R
NOV 2016
VK