Table of Contents
Advertisement
2.2 Operating Safety
1. Read and understand the Operator's
Manual and all safety signs before
using.
2. Place all controls in neutral, stop the
engine, set park brake, remove
ignition key and wait for all moving
parts
to
stop
adjusting, repairing or unplugging.
3. Do not open discharge door unless
rotor has stopped turning. Keep
others out.
4. Do not operate when any guards are
damaged or removed. Install and
secure guards before starting.
5. Keep hands, feet, clothing and hair
away from all moving and/or rotating
parts.
6. Do not allow riders on the Bale
Processor or tractor during operation
or transporting.
7. Clear the area of all bystanders,
especially
small
starting.
8. Attach securely to the tractor using a
retainer on the drawbar pin and a
safety chain.
9. Do not point discharge opening
towards people, animals or buildings
when operating.
10. Stay away from discharge path. Keep
others away.
11. Stay away from bale tines when
raising or lowering lift frame. Keep
others away.
12. Clean reflectors, SMV signs and
lights before transporting.
13. Use hazard flashers on tractor when
transporting.
14. Install lift frame lock pin before
transporting.
15. Before applying pressure to the
hydraulic system, make sure all
components are tight and that steel
lines, hoses and couplings are in
good condition.
16.
Review safety instructions with all
personnel annually.
before
servicing,
children,
before
- 2.3 -
2.3 Maintenance Safety
1. Follow
ALL
maintenance and safety information
in the manual.
2. Support the machine with blocks or
safety stands when changing tires or
working beneath.
3. Follow good shop practices:
Keep service area clean and dry.
Be sure electrical outlets and tools
are properly grounded.
Use adequate light for the job at
hand.
4. Use only tools, jacks and hoists of
sufficient capacity for the job.
5. Place all controls in neutral, stop the
engine, set park brake, remove
ignition key and wait for all moving
parts
to
stop
adjusting, repairing or unplugging.
6. Make sure all guards are in place
and
properly
maintenance work is completed.
7. Before
applying
hydraulic system, make sure all
lines, fittings and couplers are tight
and in good condition.
8. Relieve
pressure
circuit
before
disconnecting from tractor.
9. Keep hands, feet, hair and clothing
away from all moving and/or rotating
parts.
10. Place hydraulic controls in neutral
and stop engine before working on
Bale Processor.
11. Clear
the
area
especially
small
carrying out any maintenance and
repairs or making any adjustments.
L
R
NOV 2016
VK
the
operating,
before
servicing,
secured
when
pressure
to
a
from
hydraulic
servicing
or
of
bystanders,
children,
when
Advertisement
Table of Contents
