Servicing Intervals - H&S 2958 Operator's & Parts Manual

5.1.3

SERVICING INTERVALS

8 Hours, Daily or Every 10 Bales:
1. Lubricate the PTO shaft (eight locations). See Lubrication Procedure from Weasler
(following page 5.3). Follow Standard Interval Schedule.
2. Check the conditions of the rotor and flails. Remove all entangled material. Repair
damaged components. Replace broken components.
3. Check wheel bearings. Remove twine or other entangled material.
4. Check shear bolt. Tighten if loose. Replace if broken or damaged.
- 5.2 - - 28 -
L R
NOV 2016
VK