Table of Contents
Advertisement
L
R
NOV 2016
VK
4.2 MACHINE COMPONENTS
A. BALE CRADLE
B. PTO DRIVELINE
C. ROTOR
D. FLAIL
E. BODY
F. CRADLE VALVE
G. CRADLE CYLINDER
H. DEFLECTOR
I. LIFT FRAME
J. CRADLE GUIDES
K. SIDE ACCESS DOOR
L. BALE CLAMP
M. GEARBOX
The machine is designed with a PTO powered swinging-flail rotor that shreds large or
small round or square bales for feeding or bedding as appropriate. The hydraulically
activated tines on the rear of the frame are used to lift bales and load them into the
bale cradle of the processor.
A hydraulically powered cradle in the frame moves the bales over the rotor that
extends along the bottom of the machine. The rotor is equipped with swinging flails
that shred the bale and expel it out the right side discharge opening.
The discharge deflector can be set in several different positions to allow placing the
material in a row for feeding or spread out for bedding. An optional electric actuator or
hydraulic cylinder kit can be used to position the discharge deflector.
A side access door, on the opposite side of the body to the discharge, enables the
operator access to the rotor for cleanout and maintenance.
- 4.2 -
Advertisement
Table of Contents
