Table of Contents
Advertisement
TRACTOR REQUIREMENTS
There are several requirements the tractor must have
to ensure efficient operation of the Merger.
1. The tractor must be equipped with a 7-pin
connector for proper transport and warning light
function.
2. The tractor must be equipped with a 1000 RPM
1-3/8" 21 spline or 1-3/4" 20 spline PTO.
3. The tractor must be equipped with a category 2,
3N2 or 3 three point hitch (Quick Hitch would be most
desirable).
4. The tractor must also be equipped with a 3-pin
convenience outlet that is operated by tractor keyed
power.
5. The Merger requires a minimum 95 H.P. tractor,
AND that has a minimum tractor weight of 8,000 lbs.
6. Hydraulic Requirements
2 - Remotes/SCV's
12 g.p.m. per SCV
2,750 p.s.i.
TRACTOR HOOK UP
3-Point
Connect the merger hitch to the tractor 3-point using the supplied hitch pins and adapter sleeves.
Correct hitch distance from ground to center of pins is 24" to 26". If the tractor is equipped with a quick
coupler make sure the latches are engaged.
MACHINE PREP & OPERATION
MAIN TRACTOR PLUG
1.
Black (Ground)
2.
Red (Work Lights)
3.
Yellow (Left Turn)
4.
Not Used
5.
Green (Right Turn)
6.
Brown (Tail Lights)
7.
Not Used
Tractor wiring may differ. Check your
tractor manufacturers' electrical diagram
to match to the Tri-Flex Merger's wiring.
-20-
Advertisement
Table of Contents
