VADDIO ROBOSHOT12 Installation And User Manual page 34

RoboSHOT HD Cameras
Camera

NAME
camera - Base command for camera control command.
Used in conjunction with control arguments to include home,
pan, tilt, zoom, preset etc...

SYNOPSIS
camera {ccu|home|pan|preset|standby|tilt|zoom}

DESCRIPTION
The camera command is the base command used to control the camera movement

OPTIONS
ccu Various commands for getting/setting CCU values and scenes
home Return camera to home position
pan Pans the camera left or right
preset Recall or set camera presets
standby Turn standby mode on/off
tilt Tilt the camera up or down
zoom Zoom the camera in or out

EXAMPLES
camera pan left 5
Pans the camera left at a speed of 5
camera tilt up 10
Tilts the camera up at a speed of 10
camera pan stop
Stops the camera from panning
camera home
Move camera to home position
camera standby toggle
Toggle standby modes
camera preset store 1
Store current camera position as preset 1
Camera CCU

NAME
camera ccu get - Gets the ccu settings
SYNOPSIS
camera ccu get {auto_white_balance|red_gain|blue_gain|backlight_compensation|auto

DESCRIPTION
Method used to get the ccu values

OPTIONS
auto_white_balance
Gets auto_white_balance
red gain
Gets red gain value
blue gain
Gets blue gain value
backlight_compensation
Gets backlight compensation
auto iris
Gets auto-iris mode
iris
Gets iris value gain
gain
Gets gain value detail
detail
Gets detail value chroma
chroma
Gets chroma value

EXAMPLES
camera ccu get iris Gets the iris value
camera ccu get red_gain Gets the red_gain
RoboSHOT HD Cameras - Document Number 342-0795 Rev A Page 34 of 44