System Configuration Example; Diagram: Basic Connectivity Example Of The Roboshot And The Quick Connect Sr; Pre-Installation - VADDIO ROBOSHOT12 Installation And User Manual

RoboSHOT HD Cameras
S C
YSTEM ONFIGURATION
The Quick-Connect DVI-HDMI-SR interface uses two (2) Cat-5e cables to supply power to the camera, return
differential video from the camera while providing bi-directional control (RS-232) for the camera over a distance of
up to 100' (30.48m).

Diagram: Basic Connectivity Example of the RoboSHOT and the Quick Connect SR

RoboSHOT Camera Connected to Quick-Connect DVI/HDMI-SR Interface, ProductionVIEW™ Precision Camera
Controller and HD Monitor.
Rear View of
RoboSHOT Camera
Network Connection for
Camera Configuration
and Control (web server
or Telnet control).
Two (2) Cat-5e cables
between the Camera and
the Quick-Connect
DVI/HDMI SR Interface
24VDC, 2.0 A
Power Supply
ProductionVIEW
Precision Camera Controller
P -I
RE NSTALLATION

Choose a camera mounting location while paying close attention to camera viewing angles, lighting conditions,
possible line of site obstructions, and checking for in-wall obstructions where the camera is to be mounted.
Always pick a mounting location that will optimize the performance of the camera.

The included RoboSHOT wall mount can be mounted directly to a 2-gang wall box or can be mounted to a wall
using dry wall anchors.
RoboSHOT HD Cameras - Document Number 342-0795 Rev A
E
XAMPLE
RS-232 Cat-5e
RS-232
Cat-5e
◄ Power to Camera
Video to Interface ►
Quick-Connect
DVI/HDMI SR Interface
HDMI or DVI
Video
HD Monitor
(Simulated Video Feed)
Page 11 of 44