Table of Contents
Advertisement
NORMA 6003/NORMA 6003+/NORMA 6004/NORMA 6004+
Users Manual
•
Files in the Analyzer memory can be downloaded to a PC and analyzed.
•
Operating system required: Windows 10 / Windows 8 / Windows 7 (32bit/64bit).
For more information about using the Analyzer with the PC software, refer to the instructions for using
the PC software.
System Settings
The System Settings function provides the system level setup options, including general settings,
communication parameter settings, local/remote control, as well as the test of the Analyzer itself.
Enter the System Settings Function:
•
From the main screen in any operating mode push r.
All information listed in the work area of the System screen is reference information and cannot be
changed. This information is useful for troubleshooting and maintenance.
Have this information ready when contacting Fluke for technical support.
Item
Description
Model Name
Serial No.
Calibration Date
Firmware Version
DSP Version
FPGA Version
Soft Keys
62
Note
Table 31. System Information
Product name, such as Power Analyzer.
Product model, for example Norma 6004+
The unique serial number of the product, which may be requested when
contacting Fluke Customer Service.
Last calibration date of the Product. See Calibration for information on
calibration.
The version number of the internal firmware of the Product.
The version numbers of the Digital Signal Processing (DSP) device in the
Product.
The version number of the FPGA in the Product.
1 (Settings): Sets general options for the Analyzer, see
Settings.
2 (Comm.): Sets the serial communication parameters of the Analyzer,
see Set Communication Parameters.
3 (Remote): Connects remote analyzer, see Remote.
4(Maint.): Diagnoses and tests the LCD and buttons/keys of the
Analyzer, see Instrument Maintenance.
Description
General
Advertisement
Table of Contents
