Table of Contents
Advertisement
NORMA 6003/NORMA 6003+/NORMA 6004/NORMA 6004+
Users Manual
User Item View
The number of measurements can be very large depending on different wiring selection and the
number of channels. Even if the maximum number of measurements is displayed on each screen,
there could be dozens of screen pages.
The Analyzer features a User Item View function, which allows users to select up to 20 most interesting
measurements and display them on a single screen, thus avoiding frequent use of the
Enter User Item View:
From the main screen of Meter select 3 (User Item).
•
The User Item view is as shown in
Item
1
Edit
2
Add
3
Del
4
5
When you enter the User Item view for the first time, the default items are U1rms... U4rms,
I1rms... I4rms dependent on models. You can add up to 20 measurements to the list.
The Analyzer can remember the User Item views. Even if the Analyzer is turned off, the list
defined last time will be automatically displayed when you enter the User Item view next time.
Add Measurement Items
1. From the main screen of Meter, select 3 (User Item) > 2 (Add).
32
Table 14
Table 14. Meter Screen - User Item View
Edit the current item
Change the item selected at the current location.
Add measurements
Add measurements at the end of the list. Up to 20 measurements can be
added.
Delete the current item
Delete the item at the current location.
Move forward the currently selected item
Moves the currently selected measurement forward by one position in the list. If
the currently selected measurement is already at the top of the list, no action is
taken when the button is pushed.
Move backward the currently selected item
Moves the currently selected measurement forward by one position in the list. If
the currently selected measurement is already at the end of the list, no action is
taken when the button is pushed.
and the data source label shows User Item"
Description
Note
and
keys.
Advertisement
Table of Contents
