NORMA 6003/NORMA 6003+/NORMA 6004/NORMA 6004+
Users Manual
Phasor
The Phasor mode displays the magnitude and phase relationship of the voltage and current of each
phase in the selected wiring group in tabular and graphical form.
Enter Phasor Mode:
•
From the Current measurement screen push p.
The phasor screen shown in
table, and the right part is a phasor graph. The content displayed in the table on the left will be
displayed synchronously in the graph on the right.
1
2
3
4
5
6
Item
Table
Voltage phasor information
The voltage phasor information of each phase or line in the selected wiring group,
including fundamental amplitude and phase angle relative to sync source.
See
Set the Wiring Selection
Voltage unbalance
The 3-phase voltage unbalance of the currently selected wiring group.
Current phasor information
The current phasor information of each phase in the selected wiring group, including
fundamental amplitude and phase angle relative to sync source. See
Data to Display
40
Table 17
is divided into left and right parts, the left part is a phasor
Table 17. Phasor Screen
for information on wiring group.
for details. See
Set the Wiring Selection
Description
for information on wiring group.
7
8
9
10
11
Select the Phasor