Table of Contents
Advertisement
Item
EOL
Data Bits
Stop Bits
Device address
To ensure proper communication between the host/slave Analyzer, you must configure both
Analyzers correctly. Please refer to
Remote
The Analyzer supports Dual-Unit interconnection. This menu allows 2 Analyzers to be configured in
host/slave mode for 6 or 8 channels configurations. See
Instrument Maintenance
The Analyzer provides a self-diagnosis function that allows the user to test the button/key and display
screen of the Product.
Enter Diagnosis:
•
From the Main screen in any operating mode select r > 4(Maint.)
Item
1
LCD Test
2
Keys Test
Table 32. Communication Parameters (cont.)
CR
LF
CRLF
7 Bits
8 Bits
1 Bits
1.5 Bits
2 Bits
1 to 9
Dual-Unit
Table 33. Diagnostics
Push K, the screen will show alternately full-screen of solid colors of blue,
black, white, red and green.
Push J to go back to the test menu.
Test if each key is valid. All the keys on the control panel are shown on the
screen. The original function of all the keys on the control panel will be
disabled.
Each time a physical key on the control panel is pushed, the corresponding
key on the screen changes from white to yellow.
Pushing J will not take you back to the main menu. The screen will
automatically go back to the Maint. menu only after all physical
buttons/keys on the control panel have been tested.
Option
Note
Interconnection.
Dual-Unit Interconnection
Description
Power Analyzers
System Settings
for details.
65
Advertisement
Table of Contents
