Dual-Unit Interconnection - Fluke NORMA 6003 User Manual

Dual-Unit Interconnection

The Analyzer supports Dual-Unit Interconnection, that is, 2 Analyzers work synchronously in host/slave
mode to realize 6-channel or 8-channel configuration.
2 Analyzers are connected in a point-to-point manner by using the RS-485/sync adapter provided with
the Analyzer to connect the RS-485 communication ports on the right side of the 2 Analyzers, which
are 3-pin connector sockets, as shown in the
For the 2 Analyzers, one works as a host and the other works as a slave.
The host can only add user defined measurement items that have been added in the slave.
See User Item View
Figure 19. Dual-Unit Interconnection
for more information on user defined measurement items.
Figure 19.
Red: A
Blue: B
Black: GND
RS-485
Note
Power Analyzers
Operation
59