Table of Contents
Advertisement
If the measurement item is not listed in the Remote interface on the host, exit the Dual-Unit
interconnection mode and add the measurement items on the slave. See
details.
Under the Dual-Unit interconnection mode, the slave will be locked for remote operation and
the buttons on the control panel will be locked (except for (1 (Local)) and no other
operations can be performed.
Connect the Computer
The Fluke Power Analyzer software is a software that communicates between the Analyzer and PCs
through RS-485 or mini-USB interfaces. With this software, data can be controlled and summarized
simply and quickly on the PC.
With the Fluke Power Analyze software:
•
The PC screen shows the measurements, waveforms, phasors, harmonics and trends from the
Analyzer Select from all measurements such as voltage, current, power and harmonics.
•
Instrument settings: settings of the connected Analyzer can be changed in the PC software.
Note
Note
Figure 20. Connect the Computer
Power Analyzers
Operation
User Item View
for
61
Advertisement
Table of Contents
