Table of Contents
Advertisement
11. Reinstall all removed parts. Then, reconnect the power cord and all disconnected cables to the
computer.
Note: If a locking device is available, use it to lock the computer.
Microprocessor
Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Replacement procedure
1. Remove the power cord. See "Power cord" on page 53.
2. Remove the computer cover. See "Computer cover" on page 54.
3. Remove the front bezel. See "Front bezel" on page 56.
4. Remove the storage drive bay. See "Storage drive bay" on page 61.
5. Remove the microprocessor heatsink and fan assembly. See "Microprocessor heatsink and fan
assembly" on page 93.
6. Release the handle to unlock the microprocessor retainer.
7. Open the microprocessor retainer.
.
Chapter 6
Hardware removal and installation
95
Advertisement
Table of Contents
