Storage Drive Rubber - Lenovo IdeaCentre Gaming 5 Hardware Maintenance Manual

9. Screw the storage drive back into the storage drive bay.
10. Reinstall all removed parts.
11. Place the computer in an upright position. Then, reconnect the data cable and power cable to the
computer.
Note: If a locking device is available, use it to lock the computer.

Storage drive rubber

Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Replacement procedure
1. Remove the power cord. See "Power cord" on page 53.
2. Remove the computer cover. See "Computer cover" on page 54.
3. Remove the front bezel. See "Front bezel" on page 56
4. Remove the storage drive bay. See "Storage drive bay" on page 61.
5. If available in your model, remove the 3.5-inch storage drive. See "3.5–inch storage drive" on page 65.
66
IdeaCentre Gaming 5 (14L, 05) Hardware Maintenance Manual