Lenovo IdeaCentre 3 User Manual
  1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Desktop
  5. IdeaCentre 3
  6. User manual

Lenovo IdeaCentre 3 User Manual

Hide thumbs Also See for IdeaCentre 3:
Table of Contents

Advertisement

Quick Links

User Guide
IdeaCentre 3 (7L, 05)

Advertisement

Table of Contents
loading

Related Manuals for Lenovo IdeaCentre 3

Summary of Contents for Lenovo IdeaCentre 3

  • Page 1 User Guide IdeaCentre 3 (7L, 05)
  • Page 2 • Setup Guide First Edition (February 2020) © Copyright Lenovo 2020. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-...

  • Page 3: Table Of Contents

    ....9 Call Lenovo ....Work with Windows ....9 Before you contact Lenovo .
  • Page 4 User Guide...

  • Page 5: About This Documentation

    About this documentation • This guide applies to the Lenovo product models listed below. Illustrations in this guide may look slightly different from your product model. Model name Machine Type (MT) Machine Type (MT) for Energy Star IdeaCentre 3 07ADA05...
  • Page 6 User Guide...

  • Page 7: Chapter 1. Meet Your Computer

    Chapter 1. Meet your computer Front IdeaCentre 3 07ADA05 2. Optical drive* 1. Power button 4. Microphone connector 3. 7 in 1 card reader slot* 6. USB 2.0 connectors (2) 5. Headset connector 7. USB 3.2 connectors Gen 1 (2) 8.
  • Page 8 • Blinking rapidly: The computer is entering sleep or hibernation mode. • Blinking slowly: The computer is in sleep mode. Headset connector (for IdeaCentre 3 07IMB05 only) The headset connector is compatible with: • Headphones or earphones with a 3.5mm (0.14 inch), TRS (3-pole) plug.
  • Page 9 Related topics • “Use the optical drive (for selected models)” on page 12. • “Set the power plan” on page 11. • “Statement on USB transfer rate” on page 6. Chapter 1 Meet your computer...

  • Page 10: Rear

    Rear IdeaCentre 3 07ADA05 1. Padlock loop 2. Security-lock slot 4. Power adapter connector 3. Ethernet connector 5. USB 2.0 connectors (4) 6. HDMI™ 1.4 out connector 7. VGA-out connector 8. Audio line-out connector User Guide...
  • Page 11 IdeaCentre 3 07IMB05 1. Padlock loop 2. Security-lock slot 4. PCI-Express card area* 3. Ethernet connector 6. USB 3.2 connectors Gen 1 (2) 5. Power cord connector 7. USB 2.0 connectors (2) 8. VGA-out connector 9. HDMI™ 1.4 out connector 10.

  • Page 12: Features And Specifications

    To view the microprocessor information of your computer, type system Microprocessor information in the Windows search box and then press Enter. • IdeaCentre 3 07ADA05 model – Double data rate 4 (DDR4) small outline dual in-line memory module Memory (SODIMM) •...
  • Page 13 – USB-C to DP: 3840 x 2160 pixels, 60 Hz • Connect to USB-C accessories to help expand your • USB-C (3.2 Gen 1) connector computer functionality. To purchase USB-C accessories, go to https://www.lenovo.com/accessories • USB-C (3.2 Gen 2) connector • Thunderbolt 3 connector (USB-C) •...
  • Page 14 User Guide...

  • Page 15: Chapter 2. Get Started With Your Computer

    If night light mode is turned on, you can adjust the color temperature of the temperature screen. Note: Selected Lenovo computers are low blue light certified. These computers are tested with night light turned on and color temperature set to the default value of 48.

  • Page 16: Connect An External Display

    Access Lenovo Vantage Type Lenovo Vantage in the search box and then press Enter. To download the latest version of Lenovo Vantage, go to Microsoft Store and search by the app name. Key features Lenovo Vantage enables you to: •...

  • Page 17: Chapter 3. Explore Your Computer

    To ensure that the connection is successful, place the devices 10 meters (33 feet), at most, from the computer. 1. Click the action center icon in the Windows notification area. Enable the Bluetooth feature. © Copyright Lenovo 2020...

  • Page 18: Use The Optical Drive (For Selected Models)

    Note: You are responsible for evaluating, selecting, and implementing the locking device and security feature. Lenovo makes no comments, judgments, or warranties about the function, quality, or performance of the locking device and security feature. You can purchase computer locks from Lenovo.

  • Page 19: Purchase Accessories

    Lock your computer to a desk, table, or other fixtures through a Kensington-style cable lock. Purchase accessories Lenovo has a number of hardware accessories and upgrades to help expand the capabilities of your computer. Options include memory modules, storage devices, network cards, power adapters, keyboards, mice, and more.
  • Page 20 User Guide...

  • Page 21: Chapter 4. Cru Replacement

    If you intend on installing the CRU, Lenovo will ship the CRU to you. CRU information and replacement instructions are shipped with your product and are available from Lenovo at any time upon request. You might be required to return the defective part that is replaced by the CRU.

  • Page 22: Replace A Cru

    Optional-service CRUs IdeaCentre 3 07ADA05 IdeaCentre 3 07IMB05 • Wi-Fi card • Wi-Fi card • Wi-Fi card cover • Wi-Fi card cover Replace a CRU Follow the replacement procedure to replace a CRU. IdeaCentre 3 07ADA05 ac power adapter Prerequisite Before you start, read Appendix A “Important safety information”...
  • Page 23 4. Remove the power cord. 5. Install the power cord. Chapter 4 CRU replacement...
  • Page 24 6. Connect the new ac power adapter to the computer. 7. Reconnect all disconnected cables to the computer and reconnect the power adapter to the electrical outlet. Computer cover Prerequisite Before you start, read Appendix A “Important safety information” on page 65 and print the following instructions.
  • Page 25 4. Remove the screw and slide the computer cover out of the chassis. 5. Install the new computer cover and secure the cover with the screw. 6. Place the computer in an upright position. 7. Reconnect all disconnected cables to the computer and reconnect the ac power adapter to the electrical outlet.
  • Page 26 Replacement procedure 1. Remove the computer cover. See “Computer cover” on page 18. 2. Remove the front bezel by releasing the three plastic tabs as shown. 3. Install the front bezel by securing the three plastic tabs as shown. User Guide...
  • Page 27 4. Reinstall all the removed parts. 5. Reconnect the ac power adapter and all disconnected cables to the computer. Note: If a locking device is available, use it to lock the computer. Optical drive Prerequisite Before you start, read Appendix A “Important safety information” on page 65 and print the following instructions.
  • Page 28 6. Install the optical drive bracket on the optical drive. 7. Install the optical drive. 8. Connect the signal cable and the power cable to the new optical drive. 9. Reinstall all the removed parts. 10. Reconnect the power cord and all disconnected cables to the computer. Note: If a locking device is available, use it to lock the computer.
  • Page 29 4. Disconnect the signal cable and the power cable from the storage drive. 5. Remove the screw from the bracket, and then slide the storage drive and the bracket out of the chassis. 6. Remove the screws. Then, remove the storage drive from the bracket. 7.
  • Page 30 8. Align and slide the storage drive and bracket into the chassis as shown. 9. Install the screw. 10. Connect the signal cable and the power cable to the new storage drive. 11. Reinstall all removed parts. 12. Place the computer in an upright position. Then, reconnect the ac power adapter and all disconnected cables to the computer.
  • Page 31 M.2 solid-state drive Prerequisite Before you start, read Appendix A “Important safety information” on page 65 and print the following instructions. Replacement procedure 1. Remove the computer cover. See “Computer cover” on page 18. 2. Depending on your computer model, refer to one of the following to replace the M.2 solid-state drive. 3.
  • Page 32 • Remove the screw. • Slide the M.2 solid-state drive (2280) out. User Guide...
  • Page 33 • Install the M.2 solid-state drive (2280). • Secure the M.2 solid-state drive (2280) with the screw. Chapter 4 CRU replacement...
  • Page 34 • Install the thermal pad and the M.2 solid-state drive heat sink on the M.2 solid-state drive (2280). • Secure the M.2 solid-state drive heat sink with the screws. User Guide...
  • Page 35 4. M.2 solid-state drive (2242): • Open the retention latch. • Slide the M.2 solid-state drive (2242) out. Chapter 4 CRU replacement...
  • Page 36 • Install the M.2 solid-state drive (2242). • Close the retention latch. 5. Reinstall all removed parts. 6. Reconnect all disconnected cables to the computer and reconnect the ac power adapter to the electrical outlet. Coin-cell battery Prerequisite Before you start, read Appendix A “Important safety information” on page 65 and print the following instructions.
  • Page 37 If the coin-cell battery is incorrectly replaced, there is danger of an explosion. The coin-cell battery contains a small amount of harmful substance. To avoid possible injury: • Replace only with a battery of the type recommended by Lenovo. • Keep the battery away from fire.
  • Page 38 4. Install the coin-cell battery. 5. Secure the coin-cell battery with the latch. 6. Reinstall all removed parts. 7. Reconnect all disconnected cables to the computer and reconnect the ac power adapter to the electrical outlet. Memory module Prerequisite Before you start, read Appendix A “Important safety information” on page 65 and print the following instructions.
  • Page 39 Replacement procedure 1. Remove the computer cover. See “Computer cover” on page 18. 2. Disengage the latches. 3. Remove the memory module. 4. Install a memory module. Chapter 4 CRU replacement...
  • Page 40 5. Secure the memory module with the latches. 6. Reinstall all removed parts. 7. Place the computer in an upright position. Then, reconnect the ac power adapter and all disconnected cables to the computer. Note: If a locking device is available, use it to lock the computer. Wi-Fi card Prerequisite Before you start, read Appendix A “Important safety information”...
  • Page 41 5. Remove the screw, and then remove the Wi-Fi card cover. 6. Disconnect the Wi-Fi antennas from the Wi-Fi card. 7. Remove the Wi-Fi card. Chapter 4 CRU replacement...
  • Page 42 8. Install the new Wi-Fi card. 9. Connect the Wi-Fi antennas to the Wi-Fi card. 10. Install the Wi-Fi card cover. 11. Reinstall all removed parts. 12. Reconnect the ac power adapter and all disconnected cables to the computer. Note: If a locking device is available, use it to lock the computer. User Guide...

  • Page 43: Ideacentre 3 07Imb05

    IdeaCentre 3 07IMB05 Power cord Prerequisite Before you start, read Appendix A “Important safety information” on page 65 and print the following instructions. Replacement procedure 1. Turn off the computer and remove all connected devices and cables. 2. Disconnect the power cord from the electrical outlet.
  • Page 44 4. Connect the new power cord to the computer. 5. Reconnect all disconnected cables to the computer and reconnect the power cord to the electrical outlet. Computer cover Prerequisite Before you start, read Appendix A “Important safety information” on page 65 and print the following instructions.
  • Page 45 4. Remove the screw and slide the computer cover out of the chassis. 5. Install the new computer cover and secure the cover with the screw. 6. Place the computer in an upright position. 7. Reconnect all disconnected cables to the computer and reconnect the power cord to the electrical outlet.
  • Page 46 Replacement procedure 1. Remove the computer cover. See “Computer cover” on page 38. 2. Remove the front bezel by releasing the three plastic tabs as shown. 3. Install the front bezel by securing the three plastic tabs as shown. User Guide...
  • Page 47 4. Reinstall all the removed parts. 5. Reconnect the power cord and all disconnected cables to the computer. Note: If a locking device is available, use it to lock the computer. Optical drive Prerequisite Before you start, read “Computer cover” on page 38 and print the following instructions. Replacement procedure 1.
  • Page 48 6. Install the optical drive bracket on the optical drive. 7. Install the optical drive. 8. Connect the signal cable and the power cable to the new optical drive. 9. Reinstall all the removed parts. 10. Reconnect the power cord and all disconnected cables to the computer. Note: If a locking device is available, use it to lock the computer.
  • Page 49 4. Disconnect the signal cable and the power cable from the storage drive. 5. Remove the screw from the bracket, and then slide the storage drive and the bracket out of the chassis. 6. Remove the screws. Then, remove the storage drive from the bracket. 7.
  • Page 50 8. Align and slide the storage drive and bracket into the chassis as shown. 9. Install the screw. 10. Connect the signal cable and the power cable to the new storage drive. 11. Reinstall all removed parts. 12. Place the computer in an upright position. Then, reconnect the power cord and all disconnected cables to the computer.
  • Page 51 Power supply assembly Prerequisite Before you start, read Appendix A “Important safety information” on page 65 and print the following instructions. Replacement procedure 1. Remove the computer cover. See “Computer cover” on page 38. 2. Remove the screws and slide the power supply assembly out. Chapter 4 CRU replacement...
  • Page 52 3. Install a power supply assembly and install the screws. 4. Reinstall all removed parts. 5. Place the computer in an upright position. Then, reconnect the power cord and all disconnected cables to the computer. Note: If a locking device is available, use it to lock the computer. PCI-Express card Prerequisite Before you start, read Appendix A “Important safety information”...
  • Page 53 2. Remove a PCI-Express card as shown. Note: If the card is held in place by a retaining latch, press the latch as shown to disengage the latch. Then, gently remove the card from the slot. 3. Install the new PCI-Express card as shown. Chapter 4 CRU replacement...
  • Page 54 4. Secure the PCI-Express card as shown. 5. Reinstall all removed parts. 6. Place the computer in an upright position. Then, reconnect the power cord and all disconnected cables to the computer. Note: If a locking device is available, use it to lock the computer. M.2 solid-state drive Prerequisite Before you start, read Appendix A “Important safety information”...
  • Page 55 • Remove the M.2 solid-state drive heat sink and thermal pad. • Remove the screw. Chapter 4 CRU replacement...
  • Page 56 • Slide the M.2 solid-state drive (2280) out. • Install the M.2 solid-state drive (2280). User Guide...
  • Page 57 • Secure the M.2 solid-state drive (2280) with the screw. • Install the thermal pad and the M.2 solid-state drive heat sink on the M.2 solid-state drive (2280). Chapter 4 CRU replacement...
  • Page 58 • Secure the M.2 solid-state drive heat sink with the screws. 4. M.2 solid-state drive (2242): • Open the retention latch. User Guide...
  • Page 59 • Slide the M.2 solid-state drive (2242) out. • Install the M.2 solid-state drive (2242). Chapter 4 CRU replacement...
  • Page 60 If the coin-cell battery is incorrectly replaced, there is danger of an explosion. The coin-cell battery contains a small amount of harmful substance. To avoid possible injury: • Replace only with a battery of the type recommended by Lenovo. • Keep the battery away from fire.
  • Page 61 The coin-cell battery normally requires no charging or maintenance throughout its life; however, no coin-cell battery lasts forever. If the coin-cell battery fails, the date and time information is lost. An error message is displayed when you turn on the computer. Replacement procedure 1.
  • Page 62 6. Reinstall all removed parts. 7. Reconnect all disconnected cables to the computer and reconnect the ac power adapter to the electrical outlet. Memory module Prerequisite Before you start, read Appendix A “Important safety information” on page 65 and print the following instructions.
  • Page 63 2. Disengage the latches and remove the memory module. 3. Install a memory module and secure the memory module with the latches. 4. Reinstall all removed parts. 5. Place the computer in an upright position. Then, reconnect the power cord and all disconnected cables to the computer.
  • Page 64 Wi-Fi card Prerequisite Before you start, read Appendix A “Important safety information” on page 65 and print the following instructions. Before you open the computer cover, turn off the computer and wait several minutes until the computer is cool. The following illustration shows the exact location of the Wi-Fi card. Replacement procedure 1.
  • Page 65 5. Remove the screw, and then remove the Wi-Fi card cover. 6. Disconnect the Wi-Fi antennas from the Wi-Fi card. 7. Remove the Wi-Fi card. Chapter 4 CRU replacement...
  • Page 66 8. Install the new Wi-Fi card. 9. Connect the Wi-Fi antennas to the Wi-Fi card. 10. Install the Wi-Fi card cover. 11. Reinstall all removed parts. 12. Reconnect the ac power adapter and all disconnected cables to the computer. Note: If a locking device is available, use it to lock the computer. User Guide...

  • Page 67: Chapter 5. Help And Support

    Where can I get the latest device • Lenovo Vantage or Lenovo PC Manager drivers and UEFI/BIOS? • Lenovo Support Web site at https://support.lenovo.com...
  • Page 68 Use Lenovo Vantage to: • Configure device settings. • Download and install UEFI BIOS, drivers and firmware updates. Type Lenovo Vantage in the search box and then press • Secure you computer from outside threats. Enter. • Diagnose hardware problems.

  • Page 69: Call Lenovo

    Call Lenovo If you have tried to correct the problem yourself and still need help, you can call Lenovo Customer Support Center. Before you contact Lenovo Prepare the following before you contact Lenovo: 1. Record the problem symptoms and details: •...

  • Page 70: Purchase Additional Services

    • Lenovo hardware repair - If the problem is determined to be caused by Lenovo hardware under warranty, trained service personnel are available to provide the applicable level of service.

  • Page 71: Appendix A. Important Safety Information

    Customer Support Center for further guidance. • Power cords, plugs, power adapters, extension cords, surge protectors, or power supplies that are cracked, broken, or damaged. © Copyright Lenovo 2020...
  • Page 72 Note: If you notice these conditions with a product (such as an extension cord) that is not manufactured for or by Lenovo, stop using that product until you can contact the product manufacturer for further instructions, or until you get a suitable replacement.
  • Page 73 Do not use them with any other products. For your safety, Lenovo provides a power cord with a grounded attachment plug to use with this product. To avoid electrical shock, always use the power cord and plug with a properly grounded outlet.
  • Page 74 If you intend to use your PC in a country or region that is different from your ordering location, please purchase an additional Lenovo power cord for the country or region where the PC will be used. Refer to the power cord guide provided in our Web site, , for details.
  • Page 75 Plugs and outlets DANGER If a receptacle (power outlet) that you intend to use with your computer equipment appears to be damaged or corroded, do not use the outlet until it is replaced by a qualified electrician. Do not bend or modify the plug. If the plug is damaged, contact the manufacturer to obtain a replacement.
  • Page 76 If the coin-cell battery is not a CRU, do not attempt to replace the coin-cell battery. Replacement of the battery must be done by a Lenovo-authorized repair facility or technician. The Lenovo-authorized repair facilities or technicians recycle Lenovo batteries according to local laws and regulations.
  • Page 77 computer, power adapter, and many accessories produce some heat during normal operation. Extended contact with the body could cause discomfort or, potentially, a skin burn. • Do not charge the battery or operate your computer, power adapter, or accessories near flammable materials or in explosive environments.
  • Page 78 DANGER Connect and disconnect cables as described in the following procedures when installing, moving, or opening covers on this product or attached devices. To connect: To disconnect: 1. Turn everything OFF. 1. Turn everything OFF. 2. First, attach all cables to devices. 2.
  • Page 79 Liquid crystal display (LCD) notice DANGER To avoid shock hazards: • Do not remove the covers. • Do not operate this product unless the stand is attached. • Do not connect or disconnect this product during an electrical storm. • The power cord plug must be connected to a properly wired and grounded power outlet. •...
  • Page 80 2 can be dangerous due to excessive sound pressure levels. If your Lenovo computer came with headphones or earphones in the package, as a set, the combination of the headphones or earphones and the computer already complies with the specifications of EN 50332-1. If different headphones or earphones are used, ensure that they comply with EN 50332-1 (Clause 6.5...
  • Page 81 For tips on how to minimize visual fatigue, please go to to visit https://www.lenovo.com/us/en/safecomp/ “Minimizing Visual Fatigue”. Tip-over hazard prevention notice The computer may cause harm to children if it is not located in an appropriate place. Follow the tips below to protect children from harm caused by the computer tipping over: •...
  • Page 82 Remote control CAUTION: Do not use rechargeable batteries in this device. Static electricity prevention Static electricity, although harmless to you, can seriously damage computer components and options. Improper handling of static-sensitive parts can damage the part. When you unpack an option or CRU, do not open the static-protective package containing the part until the instructions direct you to install it.
  • Page 83 The cause of a problem might be change in hardware, change in software, or any other actions that might have taken place. A log book can help you or a Lenovo technician determine the cause of a problem. • Back up your data on the storage drive regularly. You can restore the storage drive from a backup.
  • Page 84 Clean the computer surface: Wipe it with a lint-free cloth dampened in mild soap and water. Avoid applying liquids directly to the surface. Clean the keyboard: Wipe the keys one by one with a lint-free cloth dampened in mild soap and water. If you wipe several keys at a time, the cloth might hook onto an adjacent key and possibly damage it.

  • Page 85: Appendix B. Accessibility And Ergonomic Information

    This chapter provides information about accessibility and ergonomics. Accessibility information Lenovo is committed to providing users who have hearing, vision, and mobility limitations with greater access to information and technology. You can get the most up-to-date accessibility information from https://www.lenovo.com/accessibility If you need additional support with the accessibility features, go to https://pcsupport.lenovo.com/...
  • Page 86 Arm and hand position: If available, use chair arm rests or an area on your working surface to provide weight support for your arms. Keep your forearms, wrists, and hands in a relaxed and neutral (horizontal) position. Type with a soft touch without pounding the keys. Leg position: Keep your thighs parallel to the floor and your feet flat on the floor or on a footrest.

  • Page 87: Appendix C. Compliance Information

    The full text of the system UK declaration of conformity is available at: https://www.lenovo.com/us/en/compliance/uk-doc Lenovo cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non-recommended modification of the product, including the installation of option cards from other manufacturers.
  • Page 88 Lenovo encourages owners of information technology (IT) equipment to responsibly recycle their equipment when it is no longer needed. Lenovo offers a variety of programs and services to assist equipment owners in recycling their IT products. For information about recycling Lenovo products, go to: https://www.lenovo.com/us/en/compliance/recycling...
  • Page 89 If the battery needs to be replaced, contact your place of purchase or contact Lenovo for service. If you need to dispose of a lithium battery, insulate it with vinyl tape, contact your place of purchase or a waste-disposal operator, and follow their instructions.
  • Page 90 Collect and recycle a disused Lenovo computer or monitor If you are a company employee and need to dispose of a Lenovo computer or monitor that is the property of the company, you must do so in accordance with the Law for Promotion of Effective Utilization of Resources.
  • Page 91 For more information about Lenovo worldwide compliance on RoHS, go to: https://www.lenovo.com/rohs-communication Turkish RoHS The Lenovo product meets the requirements of the Republic of Turkey Directive on the Restriction of the Use of Certain Hazardous Substances in Waste Electrical and Electronic Equipment (WEEE). Ukraine RoHS...
  • Page 92 India RoHS RoHS compliant as per E-Waste (Management) Rules. Mainland China RoHS User Guide...
  • Page 93 Taiwan RoHS Electromagnetic emission notices Federal Communications Commission (FCC) Supplier’s Declaration of Conformity The following information refers to IdeaCentre 3 07ADA05 and IdeaCentre 3 07IMB05, machine types: 90MV, 90NT, 90NB, and 90NS. Appendix C. Compliance information...
  • Page 94 • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult an authorized dealer or service representative for help. Lenovo is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user’s authority to operate the equipment.
  • Page 95 Klasse B. Dieses Gerät ist berechtigt, in Übereinstimmung mit dem Deutschen EMVG das EG-Konformitätszeichen - CE - zu führen. Verantwortlich für die Konformitätserklärung nach Paragraf 5 des EMVG ist die Lenovo (Deutschland) GmbH, Meitnerstr. 9, D-70563 Stuttgart. Japan VCCI Class B compliance statement...
  • Page 96 Ouvir sons com mais de 85 decibéis por longos períodos pode provocar danos ao sistema auditivo. Enable or disable the ErP LPS compliance mode Lenovo computers meet the eco-design requirements of the ErP Lot 3 regulation. For more information, go https://www.lenovo.com/us/en/compliance/eco-declaration You can enable the ErP LPS compliance mode to reduce the consumption of electricity when the computer is off or in sleep mode.
  • Page 97 Lenovo encourages you to make efficient use of energy an integral part of your day-to-day operations. To help in this endeavor, Lenovo has preset a default power plan. To change the power plan, see “Set the power plan” on page 11.
  • Page 98 User Guide...

  • Page 99: Appendix D. Notices And Trademarks

    Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead.
  • Page 100 Actual results may vary. Users of this document should verify the applicable data for their specific environment. This document is copyrighted by Lenovo and is not covered by any open source license, including any Linux agreement(s) which may accompany software included with this product. Lenovo may update this document at any time without notice.

This manual is also suitable for:

Ideacentre 3 07ada05Ideacentre 3 07imb0590mv90nt90nb90ns

Table of Contents