Table of Contents
Advertisement
Power supply assembly
Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
Although there are no moving parts in your computer after the power cord has been disconnected, the
following warnings are required for your safety and proper Underwriters Laboratories (UL) certification.
CAUTION:
Hazardous moving parts. Keep fingers and other body parts away.
CAUTION:
Never remove the cover on a power supply or any part that has the following label attached.
Hazardous voltage, current, and energy levels are present inside any component that has this label
attached. There are no serviceable parts inside these components. If you suspect a problem with one
of these parts, contact a service technician.
Replacement procedure
1. Remove the power cord. See "Power cord" on page 53.
2. Turn off the computer and remove all connected devices and cables.
3. Remove the computer cover. See "Computer cover" on page 54.
4. Remove the front bezel. See "Front bezel" on page 56.
5. Remove the storage drive bay. See "Storage drive bay" on page 61.
6. Remove the storage drive bracket. See "Storage drive bracket" on page 67.
7. Disconnect the power supply cables from the system board.
8. Press the power supply assembly tab to release.
98
IdeaCentre Gaming 5 (14L, 05) Hardware Maintenance Manual
Advertisement
Table of Contents
