M.2 Solid-State Drive - Lenovo IdeaCentre Gaming 5 Hardware Maintenance Manual

M.2 solid-state drive

Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Attention: The internal storage drive is sensitive. Inappropriate handling might cause damage and
permanent loss of data. When handling the internal storage drive, observe the following guidelines:
• Replace the internal storage drive only for upgrade or repair. The internal storage drive is not designed for
frequent changes or replacement.
• Before replacing the internal storage drive, make a backup copy of all the data that you want to keep.
• Do not touch the contact edge of the internal storage drive. Otherwise, the internal storage drive might get
damaged.
The following illustration shows the location of the M.2 solid-state drive on the system board.
Replacement procedure
1. Turn off the computer and remove all connected devices and cables.
2. Remove the power cord. See "Power cord" on page 53.
3. Remove the computer cover. See "Computer cover" on page 54.
4. Remove the front bezel. See "Front bezel" on page 56.
5. Remove the storage drive bay. See "Storage drive bay" on page 61.
6. Remove the M.2 mounting screw holding the M.2 solid-state drive in place.
7. Pivot the M.2 solid-state drive upward.
70
IdeaCentre Gaming 5 (14L, 05) Hardware Maintenance Manual