Table of Contents
Advertisement
Card reader
Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Replacement procedure
1. Remove the computer cover. See "Computer cover" on page 54.
2. Remove the front bezel. See "Front bezel" on page 56.
3. Disconnect the card reader cable from the system board.
4. Remove the screw, and then remove the card reader with bracket.
5. Remove the screws, and then remove the card reader from the bracket.
.
Chapter 6
Hardware removal and installation
77
Advertisement
Table of Contents
