Table of Contents
Advertisement
Front Wi-Fi antenna
Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Replacement procedure
1. Remove the computer cover. See "Computer cover" on page 54.
2. Remove the front bezel. See "Front bezel" on page 56.
3. Disconnect front antenna cable from Wi-Fi card and remove the front antenna.
4. Install the front antenna and connect the front antenna to the Wi-Fi card.
5. Reinstall all removed parts.
6. Reconnect all disconnected cables to the computer and reconnect the power cord to the electrical
outlet.
Note: If a locking device is available, use it to lock the computer.
.
Chapter 6
Hardware removal and installation
87
Advertisement
Table of Contents
