Note: If a locking device is available, use it to lock the computer.
Front I/O bracket
Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Replacement procedure
1. Remove the power cord. See "Power cord" on page 53.
2. Remove the computer cover. See "Computer cover" on page 54.
3. Remove the front bezel. See "Front bezel" on page 56.
4. Disconnect the power button cable from the system board.
5. Disconnect the card reader cable (if any) from the system board.
6. Press the tabs.
7. Remove the power button and disconnect the power connector.
58
IdeaCentre Gaming 5 (14L, 05) Hardware Maintenance Manual