Table of Contents
Advertisement
8. Remove the M.2 solid-state drive from the M.2 slot.
9. Install the new M.2 solid-state drive in the M.2 slot.
10. Press down on the M.2 solid-state drive.
11. Screw in the M.2 mounting screw.
12. Reinstall all removed parts.
13. Place the computer in an upright position. Then, reconnect the power cord and all disconnected cables
to the computer.
Note: If a locking device is available, use it to lock the computer.
.
Chapter 6
Hardware removal and installation
71
Advertisement
Table of Contents
