Microprocessor - Lenovo ThinkStation P350 Tiny Hardware Maintenance Manual

Removal steps

Microprocessor

Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
The heat sink and microprocessor might be very hot. Before you open the computer cover, turn off the
computer and wait several minutes until the computer is cool.
For access, remove the following parts in order:
• "Computer cover" on page 53.
• "Internal speaker" on page 54.
• "System fan" on page 55.
• "Heat sink" on page 69.
Removal steps
Notes:
• Your microprocessor and socket might look different from the one illustrated.
• Touch only the edges of the microprocessor. Do not touch the thermal grease on the top. Do not touch
the gold contacts on the bottom.
• Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be kept
as clean as possible.
Remove the microprocessor.
70
P350 Tiny Hardware Maintenance Manual