Ve.smart Network - Victron energy SmartSolar MPPT 150/45 Manual

• Connect with the VictronConnect App to the solar charger. Note that if Bluetooth has been disabled, a connection via its built-in
Bluetooth is not possible anymore. In that case use the
VRM to connect to the solar charger.
• Select the solar charger from the VictronConnect list.
• Navigate to the solar charger settings page by clicking the cog symbol
• Navigate to the product info page by clicking on the 3 dot symbol
• Enable or disable the Bluetooth setting.
• In case of disabling Bluetooth, tick the checkbox confirming you understand that once Bluetooth has been disabled, a Bluetooth
connection with the solar charger is not possible anymore.

5.5. VE.Smart network

The VE.Smart network allows a variety of products connected to the same network to share data via Bluetooth. The VE.Smart
network is especially designed for smaller systems that do not have a GX device installed.
When this product is part of a VE.Smart network it can receive data or communicate with the following devices:
• All SmartSolar solar chargers
Page 28
MPPT solar charger manual
VE.Direct to USB interface, the
in the top right hand corner.
in the top right hand corner.
Disablig or enabling Bluetooth
VE.Direct Bluetooth Smart dongle
Configuration and settings
or