Victronconnect Error Reporting; Monitoring Via A Gx Device And Vrm - Victron energy SmartSolar MPPT 150/45 Manual

You can use the charge times to see if the PV array is properly sized for your requirements. A system which
never reaches the float stage may need more panels. Or perhaps the load should be reduced?
The history can be exported as a comma separated file (CSV) by clicking the three connected dots symbol
at the top right of the history screen. The symbol varies, depending on what platform VictronConnect is used.
The history can be reset by clicking the clock with arrow symbol

7.3.3. VictronConnect error reporting

VictronConnect will indicate active errors while VictronConnect is actively connected to the solar charger. The error will show up in
a pop-up window in the status screen together with the error number, name and a short error description.
VictronConnect also displays historical errors. To see these errors, navigate to the "History" tab and look at the bottom of each
day column. If there is an error, an orange dot will indicate an error.

7.4. Monitoring via a GX device and VRM

If the solar charger is connected to a
case of solar charger alarms or faults.
For more information see the GX device manual.
If the GX device is connected to
internet.
All solar charger data, alarms and errors can be accessed via the VRM portal and solar charger settings can be remotely
changed via the VRM portal with the VictronConnect app.
Page 38
MPPT solar charger manual
Active Error and Historical error
GX device, all its data can be accessed via the GX device. The GX device will also notify in
GX device showing alarm notification and historic errors.
Victron Remote Monitoring (VRM)
Solar charger alarm logging via VRM
at the top right of the history screen.
portal, the solar charger can be monitored remotely via the
or the save symbol
Monitoring