Inter-m IPC SYSTEM Installation Manual page 41

2) Field to input change of manual ID and label of SP-100 unit
- Select SP-100 items to change from the list.
- Press the [Apply] button after inputting label and ID to change.
Caution : The ID setting sw of SP-100 on the back side must be set to the manual mode.
3) Volume and EQ setup field of SP-100 unit
- Designate volume of SP-100 and initial value of EQ .
- Setup values are applied to all the SP-100 in the same manner.
- Data are transmitted to SP-100 in the Step-6 Download.
4) SP-100 unit list field
- Able to check setup contents of SP-100.
IN TER-M P.A CO N VERGEN CE SYSTEM
IPC SYSTEM
39