M Ethod To Assemble A Side Pad - Inter-m IPC SYSTEM Installation Manual

M ethod to assemble a side pad

M ethod to assemble a side pad
M ethod to disassemble a side pad
1. Put N o. into the A-groove of N o.
make the N o.
enter in the B-, C-groove of N o.
2. Accurately match the bottom part of the SR-100
body with the bottom part of the side pad by
lightly holding the side pad up to N o.
3. After holding N o.
by pressing N o.
4. Fix the bottom with 3 screws to complete assembly.
firstly, and
(side pad locking part) entirely to
direction.
down, assemble the side pad
until " Tickle" sounds.
IN TER-M P.A CO N VERGEN CE SYSTEM
M ethod to disassemble a side pad
1. Loose 3 lower screws.
2. If holding N o.2 up after lightly holding N o.
the side pad is lightly taken out from the SR-100
body.
3. If pulling the side pad strongly to N o.4 direction
while it lowering to N o.3 direction, the side pad is
entirely separated from the SR-100 body.
③
④
②
Inside of a side pad
②
LOCK
up,
①
①
29
IPC SYSTEM