Fit Optional Carry Strap; Attach Optional Rubber Feet - Vinten V4160-0001 User Manual

Fit Optional Carry Strap

1.
Fit the attachment mount as previous section: "Fit Supplied
Attachment Mount".
2.
Fit the split ring to the mounting point at the bottom of the upper
section.
3.
Attach the strap clasps to the mounting points.

Attach Optional Rubber Feet

1.
Place the rubber foot between the spikes. Check the marking on
the foot for the correct orientation. The 'flowtech' marking must
face outwards.
2.
Bend the rubber strap 1 and engage the bottom edge of the
lever in the tripod recess.
3.
Lift the lever 2 upwards towards the tripod until it locks in place.
2
1
Accessories
19