Installation
Close Tripod Legs
1.
The legs may be closed with or without the Lock being engaged.
2.
Ensure the tripod legs are fully collapsed before moving them
inward.
WARNING! Risk of finger entrapment. Avoid trapping
!
fingers when closing the tripod.
The tripod is designed to accommodate the Mid-Level
Spreader when collapsed.
3.
Ensure the magnetic clasps have engaged and the legs are
securely held.
18
Fit Supplied Attachment Mount
1.
There are three accessory docks. These can be used to dock the
supplied attachment mount, Variable Friction Arm etc..
2.
Offer the accessory to the docking point on the tripod head.
3.
Insert the screw and tighten clockwise using a 5mm Hex key,
tighten firmly.
4.
Follow the same procedure to attach optional accessories to the
remaining mounting points if required.
Carry Strap /Tie Down Attachment
3/8" Mounting Screw
Accessories