Installation
Using Locks When no Spreader Used
The tripod can be used without a spreader using the three
lock positions.
1.
The tripod has 3 x lock positions 20°, 46° and 72°.
20°
Caution! Risk of damage. Only use the 72° hinge lock
!
setting with the legs in the fully retracted position. Do not
apply excessive load.
Caution! Risk of damage. In No Spreader Mode (Hinge
!
Lock ON) position, ensure that the feet are free to adapt to
a new footprint area when raising or lowering the tripod.
14
46°
72°
No Spreader Mode
2.
With the lock in the raised position the lock is ON.
Hinge Lock Slider in the engaged
(ON) position.
(Leg will stop at pre-set positions)
Spreader Mode
3.
With the lock in the lower position the lock is OFF.
Hinge Lock Slider in the neutral
(OFF) position.
(Legs free to move through full
movement)
Caution! Risk of damage. When using with a spreader or
!
dolly, ensure the Hinge Lock Slider is in the OFF position.