Siemens 7ML5431 Operating Instructions Manual page 98

Remote operation
7.2 Operating via AMS Device Manager
General
● Select Analog Output [see Select Analog Output (Page 84)]
● Master Reset [see Master Reset (Page 85)]
Simulation/Test
● Self Test [see Self Test (Page 85)]
● Loop Test [see Loop Test (Page 85)]
Setup
Note
For more detailed explanations of the parameters listed below see the pages referenced.
Sensor
Navigate to Configure/Setup > Setup and click on Sensor for access to:
General [see Sensor (2.2.)]
● Units
● Operating Mode
● Material
● Damping Filter
98
SITRANS LR250 with mA/HART
Operating Instructions, 10/2019, A5E32220602-AG