Siemens 7ML5431 Operating Instructions Manual page 114

Parameter reference
Quick Start Wizard (1.1.)
From measurement screen, press RIGHT arrow twice to open the Quick Start Wizard menu.
Select a wizard, press RIGHT arrow to open the first step, and follow the instructions.
Note
Do not use the Quick Start Wizard to modify individual parameters. (Perform customization
only after the Quick Start has been completed.)
● See Quick Start Wizard via the handheld programmer (Page 59).
● See Quick Start Wizard via SIMATIC PDM (Page 69).
● See Quick Start Wizard via AMS Device Manager (Page 94).
Setup (2.)
Note
Default settings in the parameter tables are indicated with an asterisk (*) unless explicitly
stated.
Device (2.1.)
Hardware Revision (2.1.1.)
Corresponds to the electronics hardware of the SITRANS LR250.
Firmware Revision (2.1.2.)
Corresponds to the firmware that is embedded in the SITRANS LR250.
Loader Revision (2.1.3.)
Corresponds to the software used to update the SITRANS LR250.
Order Option (2.1.4.)
Read only. Displays the device type: standard or NAMUR NE 43-compliant.
Menu Timeout (2.1.5.)
Time menu stays visible before switching back to Measurement view if no key is pressed.
114
SITRANS LR250 with mA/HART
Operating Instructions, 10/2019, A5E32220602-AG