Table of Contents
Advertisement
CHAPTER
15
On the MiniRAE 3000+, ppbRAE 3000+, or UltraRAE 3000+, Programming Mode can be entered
from either Hygiene Mode or Search Mode. If the current user mode is Basic, you must provide
a 4-digit password to enter. The MiniRAE Lite+ has only Search mode.
Manual datalog
When the instrument is set to Manual Datalog, you turn datalogging on and off by stepping
through the displays from the Main Display, and then pressing the keys to select datalog on/off
functions.
When you reach the screen that says "Start Datalog?" press [Y/+] to start it. You see "Datalog
l
Started," confirming that datalogging is now on.
When you reach the screen that says "Stop Datalog?" press [Y/+] to stop it. You see "Datalog
l
Stopped," confirming that datalogging is now off.
Snapshot datalog
When the instrument is in Snapshot datalogging mode, it captures a single "snapshot" of the
data at the moment of your choosing. Whenever the instrument is on and it is set to Snapshot,
all you have to do is press [MODE] each time you want to capture a snapshot of the data at that
instant.
When you send the data to a computer using Safety Suite Device Configurator (SSDC), the data
snapshots are uniquely identified by time and other parameters.
Handheld PID Monitors
PROGRAMMING MODE
68
User Manual
Advertisement
Table of Contents
