Table of Contents
Advertisement
CHAPTER
3
CHARGING THE BATTERY
Always fully charge the battery before using the instrument. The instrument's Li-ion battery is
charged by attaching the instrument to the Travel Charger (or by placing the instrument in the
optional Charging cradle). Contacts on the bottom of the instrument meet the Travel Charger's
(or Charging cradle's) contacts, transferring power without other connections.
Charging cradle
PN: 059-3059-000
Note: Before connecting the charger to the instrument, visually inspect the contacts to make
sure they are clean. If they are not, wipe them with a soft cloth. Do not use solvents or cleaners.
Follow this procedure to charge the instrument:
1. Plug the AC/DC adapter's barrel connector into the instrument's Charging cradle or Travel
Charger.
2. Plug the AC/DC adapter into the wall outlet.
3. Connect the AC/DC adapter to the Travel Charger (or Charging cradle).
4. Place the instrument into the Travel Charger or Charging cradle. The LED in the Travel
Charger (or Charging cradle) should glow.
Handheld PID Monitors
Travel charger
PN: 059-3014-000
17
User Manual
Advertisement
Table of Contents
