Table of Contents
Advertisement
3 Operating the appliance
– While the after-running time is activated, the
ing power level illuminate.
▸ To end the after-running time before time: Touch the
– This switches the appliance and the illumination off.
Power level
We recommend switching the appliance on at level 2 some 5 minutes before start-
ing to cook. Leave the appliance running for a few minutes after cooking so as to
extract all the cooking smells.
3.6
Wipe protection
The wipe protection function temporarily deactivates the keypad / control panel and is
useful for quickly cleaning the operating elements.
▸ Switch the appliance and the illumination off.
▸ Hold the
button depressed for 5 seconds.
– The wipe protection function is activated, the appliance switches off temporarily and
the
display symbol illuminates.
– The wipe protection function turns off after 30 seconds and the
longer displayed.
3.7
Saturation indicators
Metal grease filters
The
symbol in the display flashes after 20 operating hours. The saturation level has
been reached and the metal grease filters must be cleaned.
Activated charcoal filter (recirculation mode only)
The
symbol in the display flashes after 120, 180 or 240 operating hours, depending
on the default cleaning interval setting. For more details, see: Using for the first time (see
page 9). The saturation level has been reached. The activated charcoal filter has to be
cleaned and regenerated or replaced. Metal grease filters have also to be cleaned.
Reset the saturation indicator after cleaning.
▸ Switch the appliance and the illumination off.
▸ Hold the
button depressed for 5 seconds.
– The
or
Only activate the saturation indicator for the activated charcoal filter if the appli-
ance is being used in the recirculation mode. For more details, see: Using for the
first time (see page 9).
12
(flashing)
symbols in the display go out.
display symbol and the correspond-
button.
After-running time in minutes
20
15
10
5
symbol is no
Advertisement
Table of Contents
