Table of Contents
Advertisement
The appliance can be switched on simply by touching the
deflector plate completely out.
3.3
Selecting power level
Four power levels are available. Power levels1–3 with low, medium and high extraction,
as well as the intensive level.
▸ Touch the
button.
– The appliance switches on at power level 1 and the illumination is activated.
▸ Touch the
button repeatedly until the desired power level 1–3 is displayed.
– The appliance switches to the selected power level and the corresponding symbol
, or
illuminates in the display.
Intensive level
The intensive power level runs for 5 minutes. It is used for short bursts of intensive ex-
traction of cooking fumes and smells, e.g. when searing meat. The intensive power level
then switches back to the previously selected power level or switches the appliance off.
▸ Hold the
button depressed while the fan is running.
– The appliance switches to the intensive power level and the
the display.
▸ To end the intensive power level before the end of the 5 minutes' running time:
while the intensive power level is activated, touch the
– The appliance switches to the previously selected power level.
Select one of four power levels by pushing the deflector plate in and out at about
1-second intervals. Make sure to push the deflector plate as far back as it will go
until it hits the mechanical stop.
3.4
Illumination
▸ Touch the
button.
– The illumination switches on.
▸ Touch the
button again.
– The illumination switches off.
Setting the colour temperature
▸ When the illumination is active: Hold the
temperature is reached.
– The colour temperature selected will be automatically accepted.
3.5
After-running time
The purpose of the after-running time function is to remove any lingering smells. Depend-
ing on the default setting, the appliance continues to run at the power level set for 5–20
minutes and then switches off automatically.
▸ Touch the
button.
– The appliance switches on at power level 1 and the illumination is activated.
▸ Press the
button repeatedly until the desired power level is displayed.
▸ Touch the
button to activate the after-running time function.
– The after-running time starts and after it is finished (see table) the illumination and
appliance switch off.
3 Operating the appliance
.
button depressed until the desired colour
button. First pull the
symbol flashes in
11
Advertisement
Table of Contents
