Table of Contents
Advertisement
4 Operating the appliance
4.4
Intensive level
The intensive level can be selected when the appliance is switched on.
Depress the
– The
display flashes.
After 5 minutes, the appliance switches back to the previously selected power
level.
Press the
button to stop the intensive level before the 5 minutes has
elapsed.
– The appliance switches back to the previously selected power level.
4.5
Illumination
Press the
button to switch the illumination on.
Press the
button again to switch the illumination off.
4.6
Saturation indicator
Saturation indicator for the grease filters
The
display flashes after 20 operating hours. The saturation level has been
reached and the grease filters and combi filters must be cleaned.
Saturation indicator for the activated charcoal filters
The
display illuminates after 1,200, 700 or 400 operating hours, depending
on the setting selected. The saturation level has been reached and the acti-
vated charcoal filters must be replaced.
4.7
Wipe protection
This function prevents the range hood from being switched on accidentally
while cleaning.
The range hood must be switched off.
Depress the
–
illuminates in the display.
– The wipe protection switches off automatically after 30 seconds and the
display goes out.
16
button for 2 seconds.
button for 5 seconds.
Advertisement
Table of Contents
