Table of Contents
Advertisement
4 Care and maintenance
4.2
Metal grease filters
The metal grease filters should be cleaned at least every two months with normal use
(more frequently with intensive use) and whenever the saturation indicator alarm is
triggered. If properly cared for, the grease filters should provide years of service.
Removing
3
▸ Pull the deflector plate
▸ Fold down metal grease filters
the fixture.
Cleaning
▸ Clean the metal grease filters in the dishwasher. Select the «intensive» dishwasher
programme. If no dishwasher is available: Soak the grease filters in hot water and mild
detergent.
▸ Clean, rinse well with clean cold water and then wipe dry.
– Grease filters can be used again after being cleaned.
▸ Put the metal grease filters back.
▸ Reset saturation indicator alarm (see page 17).
Cleaning may cause the metal grease filters to become slightly discoloured. How-
ever, this will not affect the functioning of the filters in any way.
4.3
Long-life-Plus activated charcoal filter
The long-life-Plus activated charcoal filter should be cleaned and regenerated every 3 to
6 months with normal use and whenever the saturation indicator alarm is triggered. De-
pending on intensity of use, do not exceed 5–8 regeneration cycles. If properly cared for,
the service life of the long-life-Plus activated charcoal filter is up to three years.
Switch off the power supply to the appliance.
16
1
completely out.
at back and carefully remove from the slots
2
in
Advertisement
Table of Contents
