SWIT BM-U Series User Manual page 21

9. System— User profile saving, firmware update.
Menu Item
Key Lock *1
Recall Profile*2
Save Profile
Payload ID
Low Latency Mode*3
Green mode
Idle Duration
IP *4
Net Mask
Gateway
Port(1024~65535)
OSD TIME
Key Brightness
Language
System Reset
Update *5
*1.Key Lock
The "Menu/Enter" button can be operated when the button is locked. "Key Locked" will be displayed
on the screen when you press the Locked button or knob.
Key Locked
Menu Description
Set lock key
Select make user mode current
Save the current state as a user setting
When turned on, Payload ID information conforming
to SMPTE ST 352 standard is automatically adapted
Open or close low latency mode
Set the display mode of green mode
Set how long it will be in the no-signal state and turn
on green mode
Set up the monitor IP address to achieve remote web
control
Set OSD display time
Set the brightness of the key lamp
Select Chinese or English language to display
Reset all Settings in the menu system
Set whether to upgrade firmware
All
Value
OFF, Full Lock
Factory,USER1,USER2,USER3,USER4
USER1,USER2,USER3,USER4
OFF, ON
OFF, ON
Black Backlight, Gray Backlight
30 Sec, 1 Hour, 2 Hours, 4 Hours, OFF
192.168.001.200
255.255.255.000
192.168.001.001
08080
5~180
OFF, Low, High
中文, English
No/Yes
No/Yes
21